Vibrating Feeder

In the Sand-Stone production line, it can send materials to crusher evenly and continuously and at the same time, it can screen materials roughly. It can be used in these areas such as metallurgical industry, coal mining industry, mining-selecting, building, chemical and grinding industry, etc.

Vibrating Feeder Operating principle:

Vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign. Through drive of the motor, the two eccentric shafts start rotating to produce a linear huge power which forces the feeder to vibrate. Through the vibration, The materials will slip and sling on the funnel, moving forward, when the materials pass the screening part, smaller parts will fall down, avoiding the further crushing, so screening purpose can be reached.

Vibrating Feeder Technique Paramete:

Model	Max Feed Size (mm)	Capacity(t/h)	Motor Power(kw)	Overall Dimensions(L×W×H)(mm)	Size of Funnel(mm)	Weight(kg)
ZSW-380×95	500	96-160	11	3882×2224×2121	3800×950	4082
ZSW-490×95	500	120-240	11	4957×2277×2150	4900×950	5004
ZSW-490×110	580	120-280	15	4957×2400×2150	4900×1100	5320
ZSW-590×110	600	200-350	22	6000×2500×2150	5900×1100	6130
ZSW-600×130	750	400-560	22	6082×2580×2083	6000×1300	7800

Notice: Any change of Vibrating Feeder technical data shall not be advised additionally.